The X-Line Advance FIR-Drive version 1.1 speaker settings offer an expanded library to include the 120 models. FIR-Drive settings are available for the X1-212/90, X1-212/120, X2-212/90, and X2-212/120 models for use in full-range (FR) operation without subwoofers, or for use with subwoofers via the 80 Hz high pass (80) option. Speaker settings for X1 models are included with IRIS Net, while speaker settings for X2 models are available by request.

The X1-212/90 and X1-212/120 speaker settings are time-aligned to allow multi-pattern array creation, with the restriction that only one amplification mode can be used within a single array (either biamp or passive). Do not mix biamp and passive within the same array, and do not mix X2 and X1 models within the same array. Speaker settings for the X1 models are supported in the following Electro Voice FIR-Drive loudspeaker controllers: RCM modules for Tour Grade series amplifiers, Dx46, and NetMax N8000.

The X2-212/90 and X2-212/120 speaker settings are also time-aligned to allow multi-pattern array creation. Do not mix X1 and X2 models within the same array. Speaker settings for the X2 models are supported only in the RCM-28 module in combination with the TG-7 Tour Grade amplifier.

The X12-128 subwoofer setting is time-aligned to be positioned directly underneath an X-Line Advance series array or underneath other Electro-Voice touring, concert, or install line array models utilizing FIR-Drive processing and an 80Hz high pass filter, such as X-Line and X-Line Compact (XLC / XLCi). The X12-128 subwoofer level and equalization is set for a 1/2 ratio of subs to X1-212 or X2-212 top boxes. Subwoofer output level and alignment delay may need to be adjusted for your application. Speaker settings for X12 models are supported in the following Electro Voice FIR-Drive loudspeaker controllers only in combination with the TG-7 Tour Grade amplifier: RCM modules for Tour Grade series amplifiers, Dx46, and NetMax N8000. 

If you have questions or comments about the presets, please contact the EV Technical Support group within your region. Contact information for support in your region can be found via the Electro Voice website: http://www.electrovoice.com/contact.php